Combines 1460 30ft head

[Big_Al]

It should fit on no problem but you will have problems lifting it. You may be able to add a third cylinder and then it will lift the header. A 24 foot 810 would be a better fit for a 1460. But I think it could handle a 30 footer also. If you find a 24 foot head and want to get it make sure it has the big table auger. On the 30 foot 810 it was standard I have an 810 for my sunflower pans and it is a good old header.

 

[southpaw]

thank you for your reply. I have two slick 1460s with two slick large auger heads 24ft 810s. I am considering getting a 30 ft to see if they can handle it They do fine with 24 I am also condsidering getting a 1480