Combines 1460 unload auger belt corn being thrown out the back

[guru]

not up to play with the 1460 but on the 2188 and 2388 the unloading drive belt runs from the engine compartment down the left to a large pulley now make sure the alignment on the pulley is correct we had two move on us over the years the lock collar can sometimes come undone we also found the setting in the operaters manuel was wrong so alignement we done using a piece of string had no probs since have a look up there and goodluck

 

[Waterless_Kid]

On your unloading auger belt, check to see if the guide is interferring with the belt or anything else, you might also check the bearings or the pulley to see if it moves when unloading. On the loss out the back, have you tried slowing down the fanIJ