west_illini Guest Sep 24, 2002 #1 check your height and sensitivity control knobs in the cab. Sounds like it is set too high. Happens every once in a while to me
check your height and sensitivity control knobs in the cab. Sounds like it is set too high. Happens every once in a while to me
Farm_Kid2 Guest Sep 24, 2002 #2 Are you sure the skid plates are moving the potentiometer on the headerIJ Could one of the plates be stuck in the bottomed-out position, so the header thinks it is all the way down on the ground all the timeIJ
Are you sure the skid plates are moving the potentiometer on the headerIJ Could one of the plates be stuck in the bottomed-out position, so the header thinks it is all the way down on the ground all the timeIJ
auditor Guest Sep 25, 2002 #3 Check your potentiometer, could be not working or got bumped out of position.
jacco Guest Oct 24, 2002 #4 for about 10 minutes of your local dealer's time you can find out for sure instead of pulling your hair out...
for about 10 minutes of your local dealer's time you can find out for sure instead of pulling your hair out...