Combines 2100 series lights

[iaremec]

these combines have a service bulletin on them on this issue. they have a 20 amp. breaker in them and have been putting in 30 amp fuse or 30 amp breaker if i remember right. if it is a ground in my experience the lights will just go dim on top of cab. breaker is in the roof behind lights. go figure. i didn't engineer it. that company is defunct.

 

[amishd]

We had the same problem. Change the breaker_relay in the headboard (inside where the light switch_wiper, etc. is). we just got a new one, must of got weak.