farmertim
Guest
I had the shaft no the top of the gear box break on the one i had.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Combines 2188 unload auger broke
Unit_2
Guest
Ten to one the little shaft that drives the back half of the auger broke. Take a large pipe wrench and auger the grain out by hand and then you can handle the back half of the auger by standing on top of a truck box. When the back half stopped turning it most likely folded down the flighting on the front half of the auger. Take heart though the new updated shaft that case will sell you won't break. At least they never have for me.
offroadag
Guest
I should further qualify my problem to include that the complete horizontal auger is not turning from the gearbox and back.
Rusty
Guest
If the vertical shaft is turning and none of the horizontal ones then you have a failure of the angle gear box in the elbow (where the unloader pivots)