Combines 220 flex head breaking stabilizer

[greenstrat]

Are you talking about the shake from the wobble boxIJ If so, the 900's use a counterbalanced pitman arm, but I have one and it still shakes, almost as bad as my old 216 series. Make sure you have good parts on the spring tightener and that the spring is up tight. This is the cheesy part of the whole head, but should last 5 or 6 hundred acres without problems.. Apparantly the sch wobble box may be the only good fix. At least there will be less to tear up. The 200's will cut just as close as any brand new one, as long as you keep the are above the skids completely clean. I always wondered how the 20' would work on my old 6620, must be ok. gs

 

[sundown]

Check and see if you have the heavy stabilizer under the left side. My 220 is a 1997 and it shook bad till I called another dealer, gave him the serial n and mine was made just before they started putting on the same stabilizer as the 25 and 30 ft. heads. I think the new one has 3 arms rather than 2 on the original.