Tom_Russell
Guest
There are 2 things you can consider: 1. Have wheels custom made so they roll down the exact center between rows. or 2. Buy my spare set of 24.5 wheels and tires.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Combines 24 5x32 tires on a R62
venturis40
Guest
am running 24.5x32 on 2 - n7s with no problems in fact they work better on our ground in wet going than 30.5s they cut through to the hard pan and then you go 30.5s just sit and spin august wieser rosholt, sd
MostlyGreen
Guest
I don't believe custom rims would be necessary; - we had 24.5x32's on our R62 and it worked very well with the farmers who wanted to take stover off.
Rig
Guest
If you are using them with N-7s then you even have the 300 bushel tank and that is okayIJ I recently bought an R-60 with 24.5s and it just doesn't look right to me. I was thinking of changing to 30.5s. Maybe I don't need to.
MostlyGreen
Guest
Yes, the 24.5's do look a little inept on such a large machine. I'm not sure if these tires are even still available, but we went with Firestone Deep-tread's and they performed reasonably well, though we seldom ever completely filled the bin.
mailman13
Guest
Are you wheels off a R62 or a R52IJ As I understand they are a different bolt circle. How much for the set and how are the tiresIJ You can email me if you wish and we can discuss it further. Thanks.
mailman13
Guest
Sorry that is my old email address. Try this one: rodander@onawave.net