tbran
Guest
Probably a broke wire inside the insulation on the high wire. Does the TOP spring light a test light (NOTE WHEN TESTING UNCOUPlE THE HEADER FOR SAFETY! THE MACHINE HAS TO BE ON AS WEll AS THE HEADER TO TEST! You can test out circuits with the key on and switches on and engine not running intitailly) if not check the switch, harness to the spring. IF the spring is hot check and the BlUE wire feeding back into the module is not then you have a broke wire between the module and the spring. Could be a pin pushed out of the harness. VERY seldom doe the modules go bad.