Combines 4 paddle discharge for N5

Gilligan, We pick up the iron at a machine shop to make the mounts to secure the extra two paddles. We just copy the mounts that are allready there and mount them 90 degrees to present ones. There is a paddle kit available from Gleaner that includes the paddles and hardware to fasten them to mounts. You will need to get the four plates and carriage bolts for paddles from Gleaner also. Hope that helped. Dan

I have used Agco parts to put on 4 paddle discharge then have switched to 4 solid metal paddle similar to SonnyBrook Rotor. This eliminates the flex you get with the rubber parts from Agco and gives a positive discharge of material. I also had the outer 3 inches of each paddle hardsurfaced. Make sure if you install either (rubber or solid metal) to have the paddle behind the cylinder bar slightly, that way it cleans that bar's discharge away.