we ahd probs with one of our machine and found we had to grease it when in and then again whenit was fully extended seem that there lock up about the 3_4 position we to used a tree also good luck
what you need to do is let your auger out and leave it out. There is a wire somewhere in your electrical system that is not getting a good ground.I know this is a hydralic problem but this is electric over hydraulic problem. The best thing you can do is leave the auger out all-time.Just watch what comes up on your left side.
Yeah, we always leave out auger out until it's time to road. Of course there are very few obstructions like trees that can be ran over where we are anyway. The 66' isnt a good machine to be moving the auger all the time with.