Combines 6620 and Peas

[Bigsky]

Used to do peas with an 8820, so should be close. Cylinder in low range, maybe 400 r.p.m. and lower the drier the peas are. Concave open at least half, since the feeder chain will do half the threshing. Fan speed all the way up. bottom sieve open to about the size of pea, and just a touch more. Top chaffer open to about 3_4". Its a start, you can fine tune once you get into the peas.

 

[tbeck]

Thanks for the info! Is there a "seperator grate" in conjunction with the cyl_concave on the 6620IJ And if so, how should that be set- I would assume for maximum clearance as the threshing is not hard in peas.