batman
Guest
We are having trouble also. We shimmed the springs in the clutch to 80 Thousnds ( used thin washers that fit in the holes )We also took off two bars on the beater. it did help but not realy a fix. It was a bit much we broke two feeder chains. The dealer brought out another gearbox with I think has 40 Thousands shims.( recomended from case ) We slotted the holes in the two bars and put them back on just flush with the angle on the beater. It still isnt real good but its all we can do for now. We had most of the trouble in barley so I dont know how it will be now. We will be in some wheat soon hope it works. Also check the U joints on the feeder drive line there is some trouble with the one with the straps on it. we had to replace it with a store bought u joint because case doesnt have any it isnt even in the parts book it is caled a ( pivot shaft ) it looks like a cv joint.Also there is a greas nipple on the bottom gear box that says 300 hrs we were told to greas every day