Combines 8010 header control

We got a problems with 2 8010 this season. Header control as well. At the beginning there was an idea that auto guidance software is interfering with header control software but seems like problem is too much settings in new pro600 monitors in our case override height was set to low. I doe not know what type of the header you got but mace sure it is set right and go over all settings "header 1" and "header 2" it (does takes some time) If that will not help call your dealer to reinstall software (even if it is same version it should help). We are joking about this staff What is easierIJ To teach operator work with pro 600 or computer geek operate combine P.S Im sure you have done all calibrations right. Just one little thing for some versions of soft the calibration should be done with the header for older version with out.

To set it up you really need dealer support. In both the header 1 and header 2 screens you need to "scroll" down the screen to get to all the settings. There is a touch bar on the screen that you use.