kidroff
Guest
Are the chains slipping on the sprocketsIJ
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Combines 850 header elevator plugging
Dan_from_Aust
Guest
kidroff, no, chains aren't slipping, the slip clutch on the second (I think) paddle shaft from the top just lets go.
johnboy
Guest
Dan are your paddles timed correctllyIJ Secondly do you have the paddle covers onIJ Are your paddle rubbers are still in good conditionIJ It might also pay to check that the top slip clutch hasn't been slipping a bit and made those discs slippery,you can rough them up a bit to grip just don't get to keen because they cost a arm and a leg to replace.I'm in QlD. so if you want to e-mail me here is my add. john. litster@australis.aunz.com
buglyd
Guest
Johnboy, back in Jan. you offered Dan from Aust. advice about his pluging up the feeder paddles with slugs of barley. You told him to check the timing and mentioned about paddle covers, how are the paddles to propperly timed,and what are coversIJ I'm using a 760,V8 older model. Also which is better the paddlesIJ or a feeder chainIJ