JJS
Guest
Is the oil real foamy, when it comes outIJ Joe
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Combines 860 hydrulic oil problem
shaft
Guest
Yes it is very foamy. Also we have checked that the oil quality meets the massey specs.
Mlappin
Guest
I had a piece of equipment that had a pto operated pump and it would do the same thing when it got below freezing then after awhile it would do it all the time regardless of temp. Had a bad seal in pump that wouldn't leak oil but would let it suck air around it and foam oil up.
JJS
Guest
First thing I would check is the suction lines to the Hyd. pumps. and Hydro.Sounds like you are sucking in air somewhere. Joe.