junk
Guest
You should be able to just put an electric over hyd valve in it, maybe get the lift or reel valve off another massey, if it works lets us now, the one in my 750 is hard to work too
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Combines 860 unloading lever working hard
whizz
Guest
the problem is unlikely to be the spool valve and much more likely to be the tensioning on the belt
Deerebines
Guest
Whizz This extra spool valve in the engine compartment.....is it against the wall that is tight against the cabIJ Does this particular stack of valves have "valve priority" to your knowledgeIJ I do not want the auger taking priority over the header height valve. Also....if there was a switch put on this...when the auger hit the end of it's travel wouldn't the valve just bypass and not injure anythingIJ I hope I've not made a mess out these questions. I am a bit confused about where we are talking and I want to make sure I'm on the same page as you. Thanks