Combines 8820 for and aft

I added a fore and aft kit to my 7720 by taking a 12vdc hydraulic pump unit like used on a snow blade in front of pickup. The unit has to be able to be a power up and power down model depending on the position of voltage. I mounted it on the top of the feeder house since I only use it when using the flex head. I ran a set of wires up to a swtch I mounted on the dash by the lights. I take the pump and hoses off when not used. Probably could mount better but this works for me.

get an electric diverter valve - like a "Fasse" brand, put it in between the auger swing valve and the swing cylinder. The feed ports get hooked to the auger swing valve, one set of exit ports does the auger swing, hit a button, and the second set of exit ports run the fore_aft or deck plates. most any color dealer can get these type valves.

Thanks guys for the input. I'm leaning toward the valve betwen the auger swing cylinder and valve. I want to keep this machine as close to original as possible. She's a real cream puff and I'm quite proud of how she runs. Thanks again for the ideas. AJTIII