Combines 930 Draper

[HRGD]

The header, with the gauge wheels off the ground, will never be level because of the extra weight on the left side from the gear case and the knife drive. I use diferential pressure in the air bags to level it in the cutting position, 50psi in the left bag, 30psi in the right one.

 

[Wheaty1]

If you are running without gauge wheels put more air in your left drive tire and remove a little from the right, that's the way I leveled mine!

 

[magnum_man]

I push a button and level the head with my lateral tilt.