raneverybrand
Guest
I think the 9400 would work with big rubber,I would make sure they have the same bolt pattern.Yeh I think the only diff between the 94 and 9500 is the walk_engine_liftcylinders and drives.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Combines 9400 with 30 5x32 and 28lx26IJ
VAfarmboy
Guest
I think the 9500 also has a larger grain tank.
Farm_Kid2
Guest
Putting larger tires on the machine is not really going to hurt anything unless you use rims that have additional offset. Take a look at where the flange is located on the rims you have. The more centered the better. If you are going to split your existing rims to use with larger tires, add the material to the short side to hopefully end up pretty well centered. Then, use axle extensions (like they use with duals that have the tie rod down below) to move the tires out where you want them. With that setup axle, frame, final drive and rim problems just won't be an issue.