Combines 9600 hydraulic problem

[Hillside_farmer]

Pulled our 9600 out of the shop this summer, and the feeder house would not raise. Found that mice had chewed through the main wiring harness under the cab.

 

[greenback]

We had the same problem almost nothing would operate even high revs and found it had an air lock.If your powersteer is working maybe turn it left right quite a few times and it will pass through.I cant remember exactly what was working but we kept the oil moving and regained the hydraulics.This was in a 9550 which hadnt even been in the paddock at that time. Hope this helps

 

[riceman]

Tap lightly on the hyd. junction box. Plunger valves are sticking and will cause that problem.