patrick
Guest
Are you using the cross auger cover platesIJ
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Combines 9600 unloading slow down kit
15_40
Guest
Yes we use the cross auger coverplates, the one on the rear auger is being pushed up and deformed.
Patrick
Guest
As you are using the cover plates let me make
Augers
Guest
Slowing the auger down will help. JD makes a larger sprocket for the rear cross tank unloading auger I believe that it is either a 60 or a 61 tooth sprocket. It is listed in your parts book as Rice only. This will cure the problem for a period of time. To solve the problem check the following:
15_40
Guest
Thanks for your input. I think you nailed it when you talked about worn out augers. These are original augers in the machine, which is a 94 model with about 2000 sep hours. We have gotten a auger from a savage yard which looks pretty good and we have also gotten the slower sprocket to put on. The combine is in the shop waiting to be fixed so when it gets too cold to do anything else we'll tear into it.