Combines 9610 unloading auger

[kepitgreen]

I believe all of the combines well keep pumping with the switch in the fold position,doesn't really hurt anything but the oil gets a little hotter. when the auger is folded centre the switch to the middle position and the pumping well stop.

 

[99_9410]

When our's gets folded in, I can hear it quit pumping. But I still return the switch to neutral position just to be sure. (9410)

 

[dr__deere]

On the ten series they move the switch and stuff down on the left hand side of the machine, right around the cleaning fan motor, behind the stack valve a little below it. It is not very good on the pump to have to keep pumping, it will get the oil very hot and sometimes hot enough to make the buzzer go off. I think there is some breakers now where I mentioned that can be replaced that should take care of the problem. Hope this helps