Combines 9650sts chopper

Be patient, Deere is working on an update and have a couple experimental tailboards in my area, and they seem to work real well!

Why has it took 2 years to fix this problem. First pass in field you could tell it wasnt spreading right. thanks for reply.

I only put knives in about 1inch. Remove the next to outside fin completly, pitch the outer fin as far as you can, next fin should be 3_4 out and the inner fins all the way spread out. Raised up high as I can too. My fins are tapered to the front so that residue cannot hang on them as it is discharged from the flails. Works for Me.