Combines 97 2188 AFS

[DK_in_MN]

mudflats, Haven't been around the new Ag-leader much. CIH one was alot like the 2000, had two antennas back then, and make sure receiver has been updated to new universal(small box) receiver or you're screwed, AlOT of dealers never updated them on used machines in the lot when program was on. Moisture sensors were in the inclined auger in grain tank, unless updated to outside clean grain elevator.

 

[skinnb]

Mudflats, AFS in a 2188 should be a Agleader2000. If you only want to "yield monitor and make maps" then keep what's on it. I have a pf3000 and have used the 2000. They both use the same sensors and Trimble (best in the market) makes the GPS receiver and antenna for both Case and Agleader. Case now makes their own displays but requires an Agleader box (brain) to interpret the sensor's output. You can pick up a side mount for your moisture sensor $500 from Agleader. This was added on Case machines a year or two ago. It's a vast improvement over the incline auger mount even though both mounting locations use the same sensor. The pf3000 has some added features and you can add a lightbar to your receiver for $1450 Good luck