tbran
Guest
this is built on a modified K gleaner frame. The 860 had the 2800 diesel (assmue diesel) Be careful here; you are about at your limit..trans wise..but...you can turbo this engine with parts from any 2900 or 4.7 I would try for the .58 exhaust hsg rater than the .69 if available. and without increasing the roller to roller in the pump and just backing out the smoke screw you can gain about 10-15hp w_o smoke. Watch the temp. Don't do anything stupid with the hp as trans. parts are not cheap either. later 880's had the 4cyl. 4.33 i eng. and had about 115 hp sae net but had hydros to lessen shock load and had some beefier components..geez.. can't believe I'm giving advice to a STRIPPER... oh Deb...honestly it IS a machine....