Combines AFS Moisture question

JWK, When I installed our first side mount I had to enlarge the cutout into the elevator and plastic spacer. (burnt up motor) I also welded some flat bar on the 4" auger to help kick it in the elevator. Have you checked the fuse or held in the push button manual switch to make sure the motor isn't toastIJ Hope this helps.

Skinnbone, Thanks for the info....I have ran the motor with the push button a number of times. Fuse checks out okay. I have also the instructions on how to set the small screw on the proximity switch and the small auger does not empty out when you turn off the seperator switch. I have noticed when I had the moisture sensor out and ran the auger it sure does not empty out very well. Will cut larger hole. Thanks. Jack

Harvested oats again today and the moisture sensor display is working. Increase the load by one and is okay....But still need to check Elev. mount auger if it working correctly. Thanks Jack