Combines Ag leader What s your experianceIJ

Absolutely the best support. Yje 2000 and 3000 gives the same yield info. The 3000 has nice displau and you can use it for more thing s such as contolling a fert applicator. Checkouyt agleader.com Also check http:__talk.newagtalk.com_forums_PrecisionTalk_index.html look at discussion of the Al v Greenstar. YOu can see what these users think. I really like my Al. Have been using one since 1993 and would not want to do without. Calibration takes some time, but needs to be done rihgt.

Tecman, We have used the YM2000, PF3000, and a wide range of GPS equipment offered by Ag leader and have been very satisfied with product performance, quality, and support. We have quite a few systems out and everyone seems to be very well satisfied. Hope this helps!

HAVE HAD REAllY GOOD lUCK WITH AGlEADER 3000 ARE YOU READING YOUR OWN CARDS OR HIRING IT DONEIJ ARE YOU PUTTING THIS ON CAT MACHINEIJ IT CAN BE DONE HAVE ONE OF FIRST ONES THEY DID

We have used Ag leader products since 1997. Currently we have a PF3050 and a PF2000 w_ GPS. I really like how Ag leader concentrates on just making good practical hardware. We have a couple of retired farmers that run the combines and they can operate those Ag leaders pretty good!!!

Tecman, We have a PF3000 and use a Trimble receiver. The PF3000pro uses the circuit board from Trimble (for the receiver) and mounts it on the back of a PF3000. The Trimble unit is sealed(air tight) the Agleader version is not. As for support both are super and they use farmer hours not banker hours. There's room for improvement but the pf3000 for the money works very well.

It is been very impressive so far. The versitilty from app to app, I like. Mapping software is real handy with farm site. Spend a little more and get it all with your GPS. Spray and swathing Field maps from GPS Pf300 rate contol Yield mont. Wayne nuckolls 6623758927 is my salesman.

We are using 2 460's with PF 3000 moniters. We installed last summer and collected data all fall. Al has very good installation kits with all the hardware and instuctions to install easily. We are long time Al user's (since 94) and use the moniters to collect data on many operations on our farm (fert app, NH3, planting, spraying, ect). Drop me a note with your experiances. Thanks, Dave

Tecman, I'm from over in Australia and we are gearing up for our winter harvest right now. I have about 16 Agleader grain yield monitors in the field that I service and maintain. These guys are spread across 2 states, so I need the gear to be reliable and simple to use. During the summer season I have around 60 odd units in the field. I can't fault them at all and the data integrity is very good!!! Hope this helps you with a decision!!!

I have an AG leader 2000 model I've used for 5 years now. The information you get is surprisingly accurate (if you carefully calibrate) and the tech support is excellent. The owners manual is easy to understand. I don't use GPS. DAve