Combines Anyone no of a Case IH tractor forumIJ

[iaremec]

these senders usually go bad. it is located under the floor mat and cover. you will probably see it wet with oil or unplug it and there will probably be oil coming out of the wire conn. two senders undeer there so you will have to verify which one. machinery talk.com will also get you answers.

 

[iaremec]

machinery talk.com the lube pressure switch is probably bad. it is located under the floor maat and under the cover. there will be two senders under there , look for the one that is wet with oil [externally or inside the conn.} hope this helps you. some senders are known to be problems,this is one of them.

 

[cain]

Thanks, I will check it out. I just replced a steel oil line that had been leaking so it may have got damaged.

 

[pat]

there are some knowledgeable folks at this site: http:__redpowermagazine.com_cgi_yabb_YaBB.cgi hope this helps. Pat