silver_pride
Guest
I would check with Smiths Mill Imp for they a few rt100 tractors out with some really neat monitor bars in them. The guy to talk to would be the shop foreman Ron Roecker.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Combines Anyone own a RT series with CVT trans IJ
big_orange
Guest
Got the last series RT-130,you're right about not making a place.You're supposed to put them in the right rear corner,but I didn't like looking over my shoulder.Made brackets and mounted them off the right front cab post,eay to see,out of the way and don't hurt vision.
NDDan
Guest
AGCO has nice mount that clamps to brace inbetween upper and lower right windshield and right hand door handrail. There is also a mount for right center post and right rear corner on the earlier RT and DTs. Can't say for sure if later two kits fit the CVTs but there are mount studs in similiar location. I have a DT in shop now that has monitors and gismos wrapped all the way around right side. This tractor may even talk back if we pinch it. Anyway I think you'll realy enjoy the CVT. Take care
kernal
Guest
Does your tractor dealer have a Hesson contractIJCheck the mounting for the large square baler Field star monitor.There are also mounting kits and power outlets available as accessories in field install section of the Agco tractor sales book.
vstk
Guest
Why not look at a Fendt. They have a lot to offer and i think they package the transmission better. By the time you calculate the service contract and the fuel savings, the cost will not be much different. vstk