IowaDan Guest Sep 15, 2005 #1 Are you sure that it's not something with the switch or a ground wire problemIJ I'll be right over!!!!!!!
Are you sure that it's not something with the switch or a ground wire problemIJ I'll be right over!!!!!!!
Turbo Guest Sep 15, 2005 #2 Remove hose and fitting at top of auger swing valve for problem direction.There should be a threaded brass orfice under fitting.If this comes loose,it can plug flow of oil.If orfice is okay,reinstall. If damaged,it will have to be replaced.
Remove hose and fitting at top of auger swing valve for problem direction.There should be a threaded brass orfice under fitting.If this comes loose,it can plug flow of oil.If orfice is okay,reinstall. If damaged,it will have to be replaced.
93aRRRgh_52 Guest Sep 21, 2005 #3 found a broken o-ring on top of electric valve by oriface. Took it out, problem solved