Combines Auto reel speed not workingIJ

[NDDan]

Ground speed working in displayIJ Pacer seam to work normallyIJ Might want to switch the auto speed module with known working machine (module with ground speed and minimum speed dials on it). That might narrow it down. I was just thinking and wondering if the early R50s had the auto speed module in overhead and this may change things a bit. It would have the adjustments in overhead next to tattletales. Good luck

 

[muleman]

Ground speed and Pacer both seem to work, so I have to try changing the module. Thanks for answering , I was beginning to think noboby was around anymore. I think my module is in the lower console. I know this is a new subject but what is the easiest way to change out the accelerator rollsIJ

 

[NDDan]

I remove tention from triple seperator belt and elevator jackshaft belt after I've blown area above accelerator rolls clean. I then lay on cardboard on top of chaffer. I use electric impact to remove all bolts holding rolls in. I then install new paddles with rachet to help prevent overtighten and stripping threads. Tight but not so tight it strips threads. Seen to many guys crank with air impact and strip threads. If not taken care of it could eventially throw a paddle and that can make a mess.