hyper_harvest
Guest
Rolf,
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Combines Bar Gap Cage Rotor
Dan
Guest
Rolf, I talked to a guy a few days ago that had all cylinder bars on whole rotor shimmed out by 1_4 inch and he loved his setup. I wonder if shimming out by 1_2 inch may be overkill. You may be just as well off with your shimmed out bars at 1_4 inch to slow it up by a bit and maybe a couple at half height. Good luck. Dan
Rolf_Hedt
Guest
Dan and co have just done a check on my shimmed
hyper_harvest
Guest
Rolf,