Combines bearing pto F 2

Small Fry, F2 with ser. n39201 and up,have the unloading auger drive sheave threaded onto shaft with regular RH thread and should unsrew counterclockwise once nut is removed.You may have to use heat to get drive sheave loose. Good luck, Hyper Harvest II

have unloading sheaave off is sheave back at motor nut off can't see key way is it threaded on or pressed on or on tapered.

Small Fry, Sorry,both ends of shaft are threaded and both have lH thread in sheaves.One end is 3_4" lH thread and the other end is 1" lH thread.I was thinking of a different shaft the first post. Hope this helps, Hyper Harvest II