davy
Guest
Years ago my shaft had a slight bend. As long as cylinder isn't damaged, just replace shaft.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Combines Bent Unloader Swing Cylinder
jwakr
Guest
Actually, I had a local shop make one for me for less than the cost of the cylinder. It has worked fine for 3 years now.
mo
Guest
Depending on the vigor of the bend just put it in a press and straighten it. Make good cradles and line with inner tube. Also need a staight edge and patience.
guru
Guest
the cylinder is the main part has long has you have not damaged this you can replace the shaft with no problem either get one made or buy new just make sure it is nice and smooth straightening is not really recommended has normally you end up taking the front seal out and having other probs good luck