turbo
Guest
I have an adapter to mount massey head on Gleaner l,MIJ I don't know if it is different or not.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Combines bish adapter
dirtclod
Guest
Thanks for the help but I have been told they are quite a bit different. Haven't had a chance to ever check it out with a tape. I live near Denver where are you atIJ
Illinois_Gleaner
Guest
They are different.Wont work.
tbran
Guest
you can add a couple of links to the chain and move it forward. You can also speed up the chain with the early lat tilt sheave and belt. sorry i do not check this topic often. Harv's do not like the lat tilt because it does not fit any of the their old 'jigs' lat tilt can be removed easily if you choose that way. Pieces are the plates that bolt on the std feed hsg.
bean_grower
Guest
As far as I know there is no model n for a Bish plate. They are pretty simple and you will like the JD head on your M they fit like they were made for a Gleaner. I have a 643 JD head on my l3 and love it. If you need mesurments as to if it fits I'll try to get them off mine tomarrow and get back to you. For now the front should look like any JD feader house front. It has two bumps on top that hold the head and a bolt hole in the bottom. The rear should have a tube on top that fits in the slot where your gleaner head sits and hooks on the bottom that latch in where the head laches go. I think that the l and M adapters are the same except the hook position which is adjustable for either model. The drives for the head will be a simple PTO shaft on newer ones and may have a strait shaft on older ones. Hope this helps
Bill_from_wisc
Guest
The measurements would be nice as then I could have the owner measure it as it might save a trip.Thanks Bill
pj
Guest
what is your location. i have a massey corn head i would like to put on an r52 but i have lateral tilt so would need to modify
Turbo
Guest
I am in west central Iowa. I have pics of the adapter if you need to see it.
dairyfarmer
Guest
there was a dealer west of st louis mo that had a r42 advertised for a guy with a jd cornhead and a bish dont remember the dealers name though dairyfarmer