Combines black 438 corn head for F2

I have a black 430 that I rebuilt it has poly sheets and fits an F2 or F3 combines for sale all ready to go John

John F, Where are you located and how much do you want for your headIJ Jared (NeMO)

I am in Caledonia Michigan which is twenty miles south of Grand Rapids on the west side of Michigan. I would like to get 2,000 dollars for it but I will take any reasonable offer. John

It can be done but you will need to buy the drive shafts that go between the inner and outer rows, get the needed sheet metal and plates that go between the gathering chain sprockets for each row, cut the main beam and move in the cross auger end mounting plates, shorten the cross auger, shorten the sheets under the cross auger, get 3 narrow row dividers ect. In other words get a factory 4-30 head. I have a 8-30 head for a l2 that I have been thinking about making a 6-30 out of but the time to do it has stopped me, I wouldn't need any parts just time.

Greg, We have a good_excellent condition A438 black corn head, always shedded for sale for $700. Call or send an email if you are interested. We are located N. of S. Bend Indiana in Berrien Springs, MI. 269-473-4444 Tom

Thanks for all the responses, I thought the guy that told me that a 38" could be adjusted to a 30" without major modification was full of sHHHHHH. Thanks again. greg

John F., This guy is interested in your head....I would be, but the distance is a little much. Here's his email. morley.mclean@gmail.com Jared

Thanks I will e-mail him right away John