Combines Burned M2

Sorry to hear about the fire, almost lost mine a few years back. I believe the M and l series use the same heads with a parts kit for the throat to fit the specific combine since the l is wider than the M. Someone on here should be able to tell you exactly. likely yhe quickest way to get back to the field would be an M2 or M3.

You may end up removing some stuff like auger flight extensions and moving attaching hooks if you get an l. Whatever you buy, make sure your head drive shaft is properly lined up with the thresher countershaft to avoid wearing splines. Your head manual will list what has to be done. Good luck and I hope you are able to find a suitable replacement. Tom in MN