Combines Buying a 7700 what to look for IJ

7700--Good machine if you find one that's been taken care of and maintained. A couple areas to look at are: structure of frame under cab and motor area, the full grain tank can take a toll on these areas, the sheet metal may show some fatigue; the sheet metal enclosing the straw walkers, check near where it attaches to the body of the machine, an out of balance chopper will tear that up in a hurry; check the variable speed cylinder adjustment setup, the chain and sprockets drives to move the shieves in and out are sometimes troublesome; and one more good spot to check is the gear box at the top of the clean grain elevator that runs the auger going into the grain tank, wiggle the pulley and the auger inside, corn can work on these pretty good if they aren't greased well, we always used corn head grease in ours. If you have any other questions on the machine, let me know. Farny

Jim, I have a 78' Turbo 7700 I am thinking about selling. It's a hydro, 3215 hours and is in great shape. I am located in the SW corner of Missouri. E mail me for more info. or in you have any IJIJIJIJ's. 95man

Hi, Make sure you check the pins,bushings, and the