Combines Cab Makeovers

[Corey]

We used Fehr Cab kits on our combine and tractors. If you clean surface real good the glue supplied in kit works great. Also use a small tube of 3M Trim Adhesive if pieces come loose from poor glue job on first try. Fehr Cab Interiors 10116 N. 1900 E. Rd. Fairbury, Il 61739 815-692-3355

 

[vstk]

Your agco dealer can get you a good fitting kit through hycapicty. The only glue to use is the 3M spray. your surfaces have to be super clean. try some spray brake cleaner as they leave no residue. for the most part paint should be gone also as often when glued to paint the adhesive sticks to the paint but the paint can not hold the intererior pieces. Call Bruce at 580-832-3396, ther is a toll free number but i dont remember it. Trial fit all parts before gluing as sometimes even with factory ones a bit of trimming is needed..............good luck vstk

 

[dairyman]

I just put a HyCapacity kit in our 7040 two years ago. I thought the fit of the pieces was rather poor. Probably better than I could have done with my own tools, but still poor for a factory-cut and expensive kit.

 

[John]

Put a Hycapacity kit in my N6 2 yrs ago and fit very well, also went to the Farm Show in Des Moines today and found the KandM Mfg is gone from seats to complete cab kits for tractors and combines. Contact them at 1(800)328-1752, they carry the Black and Saddle kits for all 70 and 80 series tractors and the same for the l,M,and N, etc. Gleaners. Priced a headliner for my 8050 and was about the same as my Agco dealer quoted.

 

[Troy_Nebraska]

I have also used Fehr cab kits 7020 7045 7080 Allis tractors and F-3 combine had very good luck with fit and guality. Also found price very attractive to dealer in my area anyway.