Hyper_Harvest_II
Guest
leroy, The F2 toothed concave bar shifts the material coming past it,so grain can be seperated better.Along with low profile cylinder bars,material is gently slowed to help control rotor loss.One inch angle will not work.Too high for one,too weak for another,also will take too much horsepower.T-bran found that out with regular channel concave bars.It would be better to spend a little extra money and do it right,rather than experiment with something that has already been tried.I am not chewing on you,I just want you to have the best possible performance. Good luck, Hyper Harvest II