SuperJ
Guest
I bought a similar unit from another company and mounted it on my Case 2166. I mounted the camera on the right side below the fan. I ran the feed down the right side along with the other group of large wires. I drilled a hole on the right side of the cab through a knock-out and put in a grommet and fed the wire up to the monitor which I mounted up in the right hand corner off the cab support. Instead of using an aux power feed I pulled the headliner and hooked into the power feed for the radio as the power requirements are very small. Backing up with these cameras are very nice. Even when running in dusty beans the lens did not collect dust.