JWK Guest Jun 29, 2004 #1 Do you have the bottom sieve open to 11_16" to direct the air upwardIJ Also is your fan speed set high enough RPM.....You may have to move out the stop nut on the threaded shaft. later Jack
Do you have the bottom sieve open to 11_16" to direct the air upwardIJ Also is your fan speed set high enough RPM.....You may have to move out the stop nut on the threaded shaft. later Jack
John_W Guest Jun 29, 2004 #2 Click on "Feedback" up in the corner and shoot Marvin an email or pick up the phone and give him a call. He should be your first source of advise.
Click on "Feedback" up in the corner and shoot Marvin an email or pick up the phone and give him a call. He should be your first source of advise.