Combines Cat or Quadtrac

Turning Quadtrac wins. Reliablity Cat wins. Tracks are better made idler roller bearings and bogie bearing give no trouble on the Cat were's on the Quadtrac had lots of trouble here and its not just me, every Quadtrac I now has had some trouble starting at about 600hrs. Case have spent a lot money trying to fix this problem. Don't get me wrong Quadtracs will be the way to go once they fix it, or if you can kept a close eye on these bearings. Just so you know I do like red have 7240, 2388, STXQuad375HD and Cat85E.

Thanks downunder, what track life are you getting, everything I look at has worn out tracks.

Depends on how much truning on hard surfaces you will do, but generally about the same as you will get out of a set of tries. Here I would expect to get about 7000hrs, thats on soft sandy soils.I had a Cat 65 and done 11000Hrs on it and change the tracks at 8000hrs. All the best

I've gota 9380 with 3000 hrs on it with 3 shot tracks and the 4 the was 2 years ago if you buy a quad get new tracks on it the newer ones are better