Combines CDF rotor in older R62

Our CDF went into our '94 R-72. I was worried about non-adjustable sep. grate too, but last year worked great. Hope this year will too.

Thanks for responding Brian. What were some of the settings as far as clearances and cylinder speeds compared to the old rotorIJ Also, I am having some trouble zeroing the concave out as in the included instructions. I installed a new Agco high wire concave before installing the CDF and the sides of the concave frame hit the solid part of the cage before I can zero the cylinder bars against the concave. They get real close, about a quarter inch away from the concave but will not touch. Of course, one dealer I talked to says they have installed a lot of CDF's and have never run into this. All parts are Agco so what is the dealIJ I would like to ask you some more questions about the installation if you don't mind ,could you email me your contact information if you would like to help. Thanks. My email is rodander@onawave.net

We've zeroed in a few with no interferance problem. But I will say a buddy that has installed a few has been trimming cage if there is interferance and even if no problem he will trim to allow room for further zeroing after bars and concave wear some. Good luck