wolffman
Guest
What do you have to offerIJ I've ordered parts from CIH to install a drop spreader on my 1688. Thanks CW
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Combines chaff spreaders for CASE IH combines
Jrg_from_Germany
Guest
We work this year with the hydraulik systam of vittetoe staw spreaders at a 2188 and 2388 x-clusive and our reel stops working sometimes. Do you have this problem in usa, tooIJ thanks for your help. Jrg from germany
m
Guest
You have any chaff spreaders that allow you to keep the row on a long sieve 1680 with barleyIJ thanks
Jrg_from_Germany
Guest
Please have a look at our internet side. www.hb-technik.com so we keep the row with chaff spreader in europe
Old_Pokey
Guest
In your post on july 31, you mentioned you think the reel motor is too small. If you did'nt have this problem before you installed the Vittetoe spreaders, then the motor is not the problem. If you put a bigger motor on, the reel is going to slow down. Then if you try to put more oil to the reel, the spreaders will probably slow down. I dont know where exactly you have the spreaders plumbed in, but it sounds like you're over taxing the stock hydraulic system. I see on you website you have several hydraulic powered tools. It may sound like a lot of work, but you're probably going to have to add another pump that is dedicated to the spreaders. When the reel stops, does the spreader keep goingIJ Does this only happen when harvesting crops that load the spreaders heavilyIJ
SPREADER_MAN
Guest
MY SPREADERS SPREAD BOTH STRAW AND CHAFF UP TO 36FT
wolffman
Guest
Spreader Man, does it run off the existing hex shafts or hydrualicsIJ What's the costIJ Do you have pictures availableIJ Thanks CW
spreader_man
Guest
My spreader is just like 2388. Remove cone install a coupler and a 7" extension, install larger disks with curved bats on to cones and reinstall.
spreader_man
Guest
Cost $395.00 including hard ware. Yes have pictures. If you like e-mail me and Ill send same leave evening ph n and ill call
spreader_man
Guest
approximately the same thing as 2388 except bolt on coupler instead of snap coupler. cost $395.00 complete kit