camshaft
Guest
I installed a chopper from an N6 onto my R60. Since the chopper mounting was changed in the R series, it turned out to be a bigger job than I originally thought, the only parts I was able to use was the rotor and belt tighteners and concave. I had a machine shop install a hub in the counter shaft pulley and then was able to use that pulley. Had to buy the PTO pulley(bolts onto existing PTO pulley). Had a counter shaft made up. I made mounting plates for the rotor and welded idler bracket to housing. I'm happy with the chopper now that it's in place and working.