lee
Guest
Put the Extra long stationary cutters on the stationary bar, That you slide in from back side of chopper panel, We did this this year after having the short chopper rack for a lot of years,, And it makes confetti out of the straw
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Combines chopper on 2388
Forever_Red
Guest
lee, You need the longer cutters on the stationary part of the chopper. If yours is factory installed, you already have the longer coined (sharpened) cutters which first showed up on the 2001 models. Also, a kit was offered to allow you to raise or lower the stationary cutters from outside of the combine, the only changes since the chopper was introduced on AF combines in 1981. Be sure they are pushed up all the way up. If you want a taller cutter, I could sell you a 'Skipper Cutter Kit' which has a taller knife (sickle sections)1_2 inch taller, not sure you could still adjust from the outside w_o some modification inside. This kit will work on this style chopper all the way back to the lo Pro 915 (1974).
Forever_Red
Guest
Sorry lee, The above post was meant for pete, you are already using the tall cutters. They do make a difference.