Combines cleaning system

is it rubbing on the outside if it is teh bushings are bad or the seive frame is busted somewhere. good luck

Check your shaker arm bearings (the needle bearings). They could be gone but the rubber bushings still in good shape. Which would cause your problem. Hope this helps

Also take a look at the timing of the shaker arms, they have been known to get out of time and work against each other. That could break bolts too.

had any problems with shaker shaft(hex)bearings latelyIJ if not, check 'em. If so, check reassembly... make sure everything's there in proper order, especially on 2100 and newer machines... good advice given previously, too...

I have a patented kit that will fix your problems. Go to www.csrkit.com for details.