Combines concave fillers

[R_O_M]

We removed every 2nd concave wire in our (94)R 62. left real big holes in the concave. Used 5_16x1",round headed bolts,washers,nuts and loctite to fill bar holes. Bolt thread projected part way across to next bar but still left a good opening. Change bolt lengths until you're comfortable with the size of the gap. Crops are small grains i.e. wheat etc. lOl.

 

[Dan]

May not need any fillers. Use as few as possible to do a good job threshing without running tailings to full. Yes Gleaner has a plasic plug kit. Have dealer look it up in concave area for newer machines. Some guys tack weld in rivets. Some guys plug with a liquid plastic that gets very hard when dry.

 

[glr62]

don't know how many holes ther are, but was never so glad to find the last one, did it with the concave in the machine, after just installing it!