Combines convert 1680 control to 21888 style

think there was a post here before on that. you might check down a page or three.

I know of a company in Canada that dose this they take a new 21 series controle leaver and make some changes so the bend is right,they have all the controls on it,but the unloading auger dump,if I can rember right its a plug and bolt in kit and I think the price was around $500-600,but not sure,I saw the picture and it was in a 1688,There contact info is on this web page. www.jakz.ca

I looked up the site listed above and could not find any info concerning the uprgraded handle. I would also be interested in a plug in install 21-2300 series handle if anyone has anymore info.

just talked to him today, he is building one for me for 650.

Could i get a number or web page of this guy i would like to get it also

This is the site WWW.jakz.ca They make the conversion, but they don't have it listed on the web page, just call them.

I did this on my 1460 several years ago. It is not that hard but you need to use several relays so you don't get voltage backfeeds. I used all new parts and put a dent in the shaft and it all bolted right in. At the time it was around $200 for everything. That was 7 years ago. Craig